Frazer Parts 5700 thru 5999

Internet Explorer Users - When you Add an item to Cart and want to continue shopping
Go ahead and close the second window and continue shopping with the original window.

ALL Parts are NEW unless marked Otherwise

Books, Tires and Wheel see bottom of this page

Aeroshell 80 SAE 40 Oil for Gas Mixture - 1 NEW Quart $18.00
This product has been recommended by the Frazer Company

Mix 8 Ounces (1/2 pint or 1/4 Quart) Oil to 1 Gallon of Gasoline
Containers have Ounce Marks on Side
( Fuel Tank Capacity of Gas and Oil is 9 Quarts )
Thus 1 Quart should last for 4 Tank Loads of Gasoline

5768 V Belt Pulley (Only) for the B-74A Belt Pulley Drive Assembly $50.00
Pulley Measures 12 inched Wide x

Above used on the B-74A Belt Pulley Assembly (Sold Out)
This attachment can operate Hammermills, Auxiliary Generators, Soil and Compost Shreaders, Compressors and any other belt driven units. Easily and quickly mounted to the rear of the
rototiller.

5739 Field Mower Cutter and Blade fits Mower Below $9.95

5739 Field Mower Cutter Blade for Cutter Above $2.95

5763 Reverse Gear Drive Gear Tanged Washer $4.95

5764 Reverse Gear Drive Gear Snap Ring $1.95

5766 Wheel Hub Locking Pin $4.95

5767 Transmission Oil Seal for All Models (was $40.00 each)
I have found a New Vendor and now offer these at $20.00 each
These can be used on - 5460 Direct Drive, Free Wheel and Clutch Hub Wheel Housings
       --------------------------------------------------------------------------------------
                         Important
Check If the 5251, 5253 or 5267 are worn - if so they will cause oil to leak from axle.

This will cause the shaft 5266 to be off center in the Transmission Case Hub Flange when the weight of the machine is on the wheels.
         ---------------------------------------------------------------------------------------

There are made out of Aluminum

5790 Wheel Hub Washer Oil Seal Nut (2 per unit)
click image for close up

NEW $4.95

USED $2.50

5799 Handle Bar Adjustment Key Stud $5.00

5815 Steel Rod Link 8" x 1/2" with 1/8" Holes both Ends $4.95

5831 Fuel Strainer Shut Off Valve Packing Tillitson

Sold Out

5831B Fuel Strainer Shut Off Valve Nut $4.95

5898 Front Nose Starter Housing Assembly NEW $90.00
This sold for $150 in 2003

Includes
5101 Screen
5195 Starter Shaft
5196 Shaft Spring
5197 Shaft Snap Ring
5198 Pulley
5199 Rewind Spring
5200 Clevis Pin (Spring to Pulley)
5203 Starter Cable
5491 Housing Cooling Fan
5498 Clevis Pin (Spring to Casting)
Boxed Weight 13½ lbs

click image for full view

5898 Front Nose Starter Housing Assembly USED $30.00

click image for full size view

5915 Plug Oil Dust Seal Plug for Lock Out Axle $9.00

5918 NEW Reverse Shifter Stop Kit $50.00 - 5919A Lever shown below right sold separate

5918 and 5919A Reverse Gear Shifter Stop Assembly $60

5919A (5457B) Reverse Gear Control Lever, Pin & Bushing (Above parts used on this) $20.00
Includes 5264 and 5920. click photo for full close up view

5920 Reverse Shifting Lever Pin for 5919 $15.00

5264 Shift Lever Bushing for 5919 $10.00

5960 Reverse Shifter Stop $25.00
This is used on 5919A sold separately above
click photo for full close up view

5926 Transmission Reverse Detent Spring for units with Reverse Gear $2.00

5929 Transmission Reverse Shifting Lever Spring $3.00

5934 & 5328 Free Wheel Hub Assembly with Lock Out SOLD OUT
Used on any Frazer Rototiller.

Makes turning on the sport easy like a tank with the pin in

You can convert your straight axle with this. Can be installed on either side.
Frazer Rototiller this came off of had a 5935 & 5936 installed on the opposite side
The 5835 & 5936 I am selling separate

5935 & 5936 Direct Hub Assembly - This is NOT a Clutch Hub $40.00
Similar to the 5565 Clutch Hub, but without the Lever and all internal parts
This is only the inner housing 5935
and the outer hub 5936 that the wheel/rim attaches to

5944 Reverse Assembly $200.00
Comes with 2 each 5228 gaskets

5944 Conversion to add Reverse to your Frazer Rototiller $190.00
This does not include the actual Reverse Gear Assembly shown above
includes everything else you need to convert a Frazer without reverse Assembly.
Includes Step by Step Manual and all parts shown below

5950 Complete Rototiller Gasket Replacement Kit $50.00
Includes: 5004, 8, 29, 31, 50, 52, 61, 67, 85, 87, 98, 5228, 33, 75, 77
plus FM Magneto 5110, ES Magneto 5151, 5155

5952 Used Canister Muffler, Gasket and Bolts $50.00

5959 Decal Kit $25.00

(2 each of Rototiller)

GP-12 Transmission Oil Seal Puller $25.00

5962 Reverse Lever Stop Pin $15.00

Control Plate (Mounts on top Hood) $27.00
I have not cleaned this, I did not want to ruin it.
Click on Image for Full View

5000NP Serial Number Plate (NEW) $10
I had sold the last of my New Old Stock which was made decades ago.
I found a vendor to make this new replica

400 - 12 NEW Vredestein 4 Ply V Lug Tire $75.00
Measures: 4.3" Wide x 20.3" Tall
Weighs 8 pounds (shipped as is, No box needed) from 46806

Used Tires click below - $35 each

5 - 12 NEW 6 Ply V Lug Tire $79.00
(5.0" Wide x 20.8" Tall) Will fit 400 or 5-12 Rim
Weighs 14 pounds shipped USPS from 46806

Used Goodyear 6-12 Lawn and Garden Tires and Rims $60.00
21" Wide x 6-1/4 Deep
Rims are 5 Lug with 4-1/2 Spread Bolt Pattern.

Will Include Extended Hood Bracket so tires clear the hood

Pick up or Shipping thru Fed Ex
Estimate shipping go to Fed Ex and enter 48 Lbs from 46792